Archive for Term: Prosthetic Making & Casting

Products 1 - 19 from 19. Products on page
  • 3rd Degree Silicone Modelling Compound
    215,00 kr.540,00 kr.

    Alcone's 3rd Degree Silicone Modeling Compound is an extremely versatile product that can resurface skin, create special effects and even be poured into molds! This Silicone Molding Compound creates realistic wounds, scars, and prosthetics, or fill in uneven texture to smooth out skin. Choose your size, or get both and refill your smaller jar for transporting in your kit!

  • CHAVANT CLAY 2LB BLOCKS Le Beau Touche
    170,00 kr.

    • Sculpting & modelling clay
    • Extremely soft & flexible
    • LBT- Le Beau Touche
    • Sulphur free formula
    • Used in professional special effects makeup
    • Wax based, melts at low temperatures
    • Will not dry or crack
    Chavant Clay LBT (Le Beau Touche)is a professional sculpting material for lifecasting, also known as Plasteline in the industry. Sulphur free, extremely smooth, soft, flexible and tacky with exceptional adhesive qualities. 2lb Block. This product is intended for use by a professional Make Up Artist.

  • CHAVANT CLAY 2LB BLOCKS NSP HARD
    170,00 kr.

    NSP Professional Oil Based Clay Chavant NSP Sculpting Clay: Chavant NSP (Non Sulphurated Plasteline) is a sulphur free professional oil based sculpting clay and is probably the finest quality non-drying modelling clay available. It is used extensively by many Sculpture and Film Studios in the USA for creating models and sculptures prior to having a mould made. Chavant clays cannot be fired in a kiln.

  • CHAVANT CLAY 2LB BLOCKS NSP MEDIUM
    170,00 kr.

    NSP Professional Oil Based Clay Chavant NSP Sculpting Clay: Chavant NSP (Non Sulphurated Plasteline) is a sulphur free professional oil based sculpting clay and is probably the finest quality non-drying modelling clay available. It is used extensively by many Sculpture and Film Studios in the USA for creating models and sculptures prior to having a mould made. We have in this respect found that the clays perform excellently when using silicone rubber to take a mould. Chavant NSP clay has low odour and is certified nontoxic by the Art and Craft Materials Institute in the USA, conforming to ASTM D4236. Chavant NSP Clay may require some heat to soften it to your required working consistency. The ideal softening range is 44 55ºC. It easily warms in hot air with no cracking or drying. The Clay has excellent adhesive properties sticking readily to itself or the armature wire. The Clay is tough but firm, and has the ability to hold excellent detail. The Clay can be smoothed with water, or (taking adequate precautions) lighter fuel or turpentine spirit. Three grades are available: soft, medium and hard. Supplied in 907g (2lb) sealed blocks. Colour: grey / green or tan, colours varies depending on what is in stock if you are after a particular colour please let us know when order and we will try to give you the colour of your choice. Chavant clays cannot be fired in a kiln.

  • CHAVANT CLAY 2LB BLOCKS NSP SOFT
    170,00 kr.

    NSP Professional Oil Based Clay Chavant NSP Sculpting Clay: Chavant NSP (Non Sulphurated Plasteline) is a sulphur free professional oil based sculpting clay and is probably the finest quality non-drying modelling clay available. It is used extensively by many Sculpture and Film Studios in the USA for creating models and sculptures prior to having a mould made. We have in this respect found that the clays perform excellently when using silicone rubber to take a mould. Chavant NSP clay has low odour and is certified nontoxic by the Art and Craft Materials Institute in the USA, conforming to ASTM D4236. Chavant NSP Clay may require some heat to soften it to your required working consistency. The ideal softening range is 44 55ºC. It easily warms in hot air with no cracking or drying. The Clay has excellent adhesive properties sticking readily to itself or the armature wire. The Clay is tough but firm, and has the ability to hold excellent detail. The Clay can be smoothed with water, or (taking adequate precautions) lighter fuel or turpentine spirit. Three grades are available: soft, medium and hard. Supplied in 907g (2lb) sealed blocks. Colour: grey / green or tan, colours varies depending on what is in stock if you are after a particular colour please let us know when order and we will try to give you the colour of your choice. Chavant clays cannot be fired in a kiln.

  • Kryolan Artex
    295,00 kr.

    Artex er ideel til at skabe 3D hudeffekter som sår, ar og forbrændinger - og til at skjule uønskede hudanomalier. Bland forsigtigt lige dele (1: 1) og påfør på huden. Du kan skabe den ønskede effekt straks efter påføring. Hærdningsprocessen begynder efter 5-6 minutter. Når plastmaterialet er tørret, kan du skabe det ønskede farve design. Så snart produktet er hærdet er det ikke længere mulige at ændre det. Den endelige effekt kan skabes med enhver form af Kryolans fedtmaling eller Body Illustration Color. For at skabe en naturlig hudfarve blandes Flocking i Artex. Påfør pudder for at sette. Artex forbliver fleksibel på huden og kan fjernes ved blot at trække den af. Artex er lugtfri. For at undgå udtørring skal du sørge for at lukke beholderen efter hver brug. Opbevar Artex et køligt og tørt sted. Opbevares kun i originalemballagebeholder. Dette er et special effects produkt, og ikke et kosmetik produkt. Holdes væk fra børn.

    PRODUKTKODE: 06560/00 DETALJER: 2x 40 ml

  • Kryolan Cold Foam SF-
    906,00 kr.

    Cold Foam SF is a fine-pore polyurethane foam consisting of 2 components, with good skin structure for facial and body appliances, for 3-dimensional mask effects. Cold Foam is a reaction foam that reaches a volume 5 to 6 times its original size. The set consists of the 2 components and a release agent. Separately weigh out the correct amounts of the base component and the reaction component. Then, use a disposable cup to manually mix these two components quickly and thoroughly. Next, immediately pour the finished mixture into a mold onto which a separator agent has been carefully applied. The mold must then be immediately closed and fastened shut with a screw clamp or with fastening straps. After 45 to 60 minutes, the mold can be opened and the foam appliances can be removed from the mold after thorough powdering. Cold Foam SF appliances are bonded in place with Spirit Gum or Pros-Aide. Details: 500 ml + 175 ml + 100 ml

  • Kryolan Flocking Color Additive
    115,00 kr.

    Flocking er et ekstra farveadditiv lavet af meget fine polyamidfibre. Dette produkt er egnet til at simulere en naturlig hudfarve. Tilsæt en lille mængde flocking til Artex, Gel-Foam eller andre transparente eller halvgennemsigtige præparater for at skabe et fint mønster af huden.

    PRODUKTKODE: 06080/00 DETALJER: 50 g

  • Kryolan Flocking Color Additive Shaker
    55,00 kr.

    PRODUKTKODE: 06081/00

    Flocking er et ekstra farveadditiv lavet af meget fine polyamidfibre. Dette produkt er egnet til at simulere en naturlig hudfarve. Tilsæt en lille mængde flocking til Artex, Gel-Foam eller andre transparente eller halvgennemsigtige præparater for at skabe et fint mønster af huden.

  • Kryolan Glatzan L 1000 ml-
    720,00 kr.

    Glatzan L is a liquid synthetic material for creation of ultra-thin bald caps. In a well-ventilated room, Glatzan is thinly and uniformly applied by brush to a head form and allowed to dry. After the surface has dried, this procedure should be repeated at least three times, in order to reach the required material thickness. The outer borders of the cap, however, should consist of only 1 or 2 layers, to provide an especially thin edge for fine transitions. After application of the last layer, the bald cap should be allowed to thoroughly dry all the way through (for 6-12 hours). It can then be thoroughly powdered and carefully removed from the head form. The removal process should start at the nape of the neck and then proceed slowly in the direction of the forehead. Bald caps created in this way should be used only after the fumes have completely dispersed, and after there is no greatly noticeable smell of solvent. Details: 1000 ml

  • Kryolan Glatzan matt 500 ml-
    440,00 kr.

    Glatzan Matt is the matt version of Glatzan L for the last coat, to achieve a matt effect. Glatzan Matt is applied thin and uniformly by brush as the last layer on thoroughly dried Glatzan L. Details: 500 ml

  • Monster Clay - Sculpting Clay for special effects (2.27kg/5lbs)
    600,00 kr.

    Monster Clay® Premium Grade Modeling Clay is a re-useable sulfur free, professional oil/wax based sculpting medium. Composed entirely of non-toxic, food grade components, Monster Clay® has an ultra smooth formulation that features a low melt temperature and a low tack feel that will not stick to tools or fingers. Monster Clay® has high plasticity and has a unique elastic quality much like soft taffy when warm. At average room temperature,  Monster Clay® is firm enough to capture even the finest details and can be re-used and re-melted indefinitely. Monster Clay® melts easily to a pourable consistency and is great for making copies of life casts where changes are needed. This sulfur free recipe is compatible with platinum silicone molding compounds. Buy it once and re-use it over and over again. Each five pound quantity of Monster Clay® Premium is individually packaged in a convenient, reusable oven-safe container. Best of all, Monster Clay® has lower density than the average oil based clay medium. This means that you receive approximately 25% more clay per pound without the added cost. Available in SOFT, MEDIUM and HARD grades!

  • N.S.P HARD/MEDIUM/SOFT BROWN CHAVANT
    170,00 kr.

    Chavant NSP is the most popular choice for prosthetics sculpture. It is wax based and melts well at low temperatures until fluid enough to pour or brush in to moulds. Chavant NSP is available in soft, medium and hard.

  • PLATSIL GEL 10 (1 KG KIT)
    575,00 kr.

    Platsil Gel 10 is a unique, 1:1 mix fast curing platinum/addition cure silicone that can be used for making molds, props and masks. With the addition of a Deadener, you can create silicone gel prosthetics and animatronic skins. Platsil Gel 10 has a 5-6 minute working time and a 30 minute demold time, curing to a Shore A10 hardness. Use Platsil Gel 10 as a mold rubber or to create prosthetic appliances. Use the Smiths Deadener to eliminate the synthetic look and feel of ordinary silicone rubbers. Deadened Platsil Gel 10 can be made to look, feel and move like a variety of living tissue. Unlike silicone fluid, Smith’s Theatrical Prosthetic Deadener does not leach from the cured rubber/appliance so bonding and use are far easier.

  • PLATSIL GEL 10 (2 KG KIT)
    950,00 kr.

    PlatSil® Gel-10 This is the Silicone system used by the worlds top Prosthetic technician, It has been used on recent most of the recent oscar nominated films and has seen success in movies such as The Iron Lady, and Harry potter, lord of the rings, and Benjamin Button, Pans Labrinth, and so on and on. It delivers the flesh like results unlike any other silicone product, it is quick easy to use has a nutreul translucent colour and when mixed with mouldlife skin pigments a skin tone and flesh like movement can be created. Platsil Gel 10 is a relatively inexpensive system that can create the most amazing makeup results. The system: 1A:1B (by weight or volume) platinum-cured silicone systems with 6-minute working and 30-minute demold time. PlatSil Gel10 cures to a Shore A10 hardness, But remember to create prosthetic parts you need to add the Smiths deadener to achieve the gel status. Use PlatSil Gels as mold rubbers, to create prosthetic appliances. We offer an array of accessory products that can be used independently or in conjunction with to increase working time; accelerate cure time; thicken the mix for brushing/layering; thin the mix for easier pouring or for softening; or “deaden” the rubber to soften and eliminate the snappy, synthetic look and feel of ordinary silicone rubbers. FEATURES: • Soft, translucent, silicone rubbers • Add “Deadener” to create ultra-realistic prosthetic appliances • Fast 30-minute demold with 6-minute working time • PlatSil® 71R Retarder slows the cure • PlatSil® 71/73X Accelerator speeds the cure • PlatThix thickens the mix to a brushable paste • Bonds to Poly Plastics

  • PLATSIL GEL 25 (2 KG KIT)
    995,00 kr.

    Mouldlife presents the revolutionary Platsil Gel 25, introduced at IMATS London 2014. Combine with either Deadener LV or Part H Hardener for the most versatile product on the market! Less Inventory, More Control. - Exceptionally low A & B mix viscosity - Add Deadener LV to create 'super gel' for prosthetics - Add Part H Hardener to increase to 40 Shore A - Low Shore silicone for animatronics - High clarity for flat moulds - Same great tear strength as Gel 10 - Rapid prototyping moulding material - General purpose moulding material

  • Platsil Gel 25 Silicone Rubber 1kg kit
    588,00 kr.

    Mouldlife presents the revolutionary Platsil Gel 25, introduced at IMATS London 2014. Combine with either Deadener LV or Part H Hardener for the most versatile product on the market! Less Inventory, More Control. - Exceptionally low A & B mix viscosity - Add Deadener LV to create 'super gel' for prosthetics - Add Part H Hardener to increase to 40 Shore A - Low Shore silicone for animatronics - High clarity for flat moulds - Same great tear strength as Gel 10 - Rapid prototyping moulding material - General purpose moulding material

  • Professional standard sculpting clay / Air Drying Clay 10kg
    100,00 kr.

    Professional standard sculpting clay, suitable for both small-scale projects and life-sized models. Can also be used for building clay walls for mould making purposes. This is an air drying clay.

  • SUPER SCULPEY 454g
    225,00 kr.

    Super Sculpey , lys hudfarvet, 454g Modelleringsmasse, som foretrækkes af professionelle dukkemagere Skal hærdes/bages i ovn ved 130 °C alt afhængig af tykkelse og størrelse